Our ATV tow behind multi-cut mover steps beyond the ATV flail mowers and offer you much higher efficiency, cutting capacity and more uses.

With a strong Loncin V-Twin, 25hp OHV 803cc four-stroke, heavy rotor design with 2 sharp Pro-Tek knives, adjustable cutting height: 25-355mm and a cutting width of 1168mm you have access to a huge rock power that is hard to beat.

Brush, shrubs and small trees is cut without problems, thick and tall grass is cut at a brisk pace, the brush in the side of the road is easy cut. A powerful machine (weight 215kg) who perform the most you could want without complaining.

Construct Game Going

With our ATV mowers, you get a unique opportunity to make food ploot fields in an easy and fast way. You easily cuts overgrown fields with high grass, tufts, saplings and shrubs. Do you have areas with very brush is a good tip not to cut this down completely on the entire surface. Adjust instead cutting height to 35cm and cut through the area. Bitches get in this way a hefty growth of shoots that wildlife can use during the late fall and winter. By applying game goes on this way, you create longings crop that covers a larger period of the year and provide forage for wildlife during snöperioden. The machine's high cutting height gives opportunities that only our machine offers the Swedish market for ATV gear.

Cut Arable / Lawns

Fields around the cottages and houses are quick and easy to care for, you choose the cutting height from 2.5 to 35.5cm. The machine can easily be set to be drawn with an offset of 100%, 50%, or right behind. At 100% offset, the machine completely free at the side of the ATV, which means you do not run down the grass before it is cut.

Recommended cutting speed is up to 12km / h. The cutting width is 1168 mm, the ability to cut even a bit higher speeds means that you get plenty of time for other things. Slåtterknivens high rotational speed gives good cutting results. The versatility and effectiveness of the Z-aim Brush Mover makes it a perfect choice for individuals, owning common in the village, the hunting or farming. Quick to relax behind the ATV, automobile, etc.

Cutting roadsides

ATV mower is with its powerful motor and sharp knives and high adjustment possibility for the cutting height perfectly designed to cut tough vegetation and brushwood by roadsides. To cut ditches, you can use your ATV or ordinary car for towing. The coupling is suited 50mm bullet. When mowing ditches are comfortable cutting height to avoid hitting the stone from 20cm and up.

Towing / settings

The pulling device is equipped with a rotatable hitch 50mm. It is adjustable laterally, left, right and straight back in several stages; 100%, 50%, 0%. Changing mode requires no tools. Kulhandskens height above the ground can easily be set in fixed positions to fit perfectly on your machine.

Start / stop and the activation of rotor blades.

The cutting deck is equipped with 12V electric starter key.

For safety and efficiency, the machine has remote control for throttle through the wire that easily attaches to your ATV. The knives are not activated when the machine is idle, but only when the speed is increased and clutch during engine strikes.

Engine:

LONCIN LC POWER LOW CARBON TECHNOLOGY SERIES ENGINE

The manufacturer's latest model with patented and modern technology and high power.

LCPower technology is Loncin patent technology used to meet EPA Phase III emission regulations. The LCPower technology is based on in-engine emissions controlthat operate with lower emissions and higher performance.

Core Technology

The core technology of LCPower Is The innovative design of engines' combustion chamber and related components.

New Combustion Chamber

New combustion chambers have a smaller surface to volume ratio with the spark plug located at the center of combustion chamber to shorten the flame propagation distance, and make the gas mixture to burn more quickly and sufficiently to Improve the combustion efficiency and exhaust emissions.

New Air Inlet Outlet Channel

New air channel providesprofessional helpfull air flow area and lower intake resistance, cooprate with the new cam profile to minimize the intake and exhaust off and Increase air inflow During surgery; it also increases the tumble ratio in the cylinder Significantly to allow the fuel and air to mix more sufficiently and burn more Efficiently.

Lightweight Piston and Piston Rings

The new T-shape piston and piston rings Reduces the HC emission and engine power loss, slow down the deterioration process by Their lightweight Decreasing the friction power loss and reciprocating inertia force to fit and move in the cylinder smoothly.

Optimized Ignition System

New ignition systems with optimized ignition timing and improved spark energy enables gas mixture to burn more completely Providing higher power output.

Fine Tuned Carburetor

Fine tuned carburetor Provides optimum air-fuel ratio and Suitable fuel spray pattern for each operating condition for the best fuel economy and exhaust emissions.

Optimized Compression Ratio

The Optimized Compression ratio decreases combustion temperature Suitably to Reduce the NOx and HC emissions.

Specifications:

          Engine type V-Twin cylinder, 4stroke, Air-forced, OHV

          Displacement 803cc

          Bore x Stroke 82mm × 76mm

          Net power 18kW / 3600rpm

          Net torque 55 N.m / 2400rpm

          Idle speed 1650 ± 100R / min

          Compression ratio 8.7:1

          PTO shaft rotation Anti-clockwise (from PTO side)

          Ignition system Transistorized magneto ignition

          Starting System Electic starter

          Lubrication system Splash

          Governor system Centrifugal mass type

          Air cleaner Semi-dry, dual element

          Oil capacity 2.0L

          Fuel tank capcity 15.0L

          Net weight 42kg

          Dimension 466 × 480 × 356mm

Förorder: Book through order@z-aim.com or call 0950-13500.